• Vinification Plants enology – fermenter – supports
COSTACURTA S.p.A. - VICO - DRILLED PLATES
Via Grazioli, 30 - 20161 Milano (MILANO) - ITALY
Tel.: +39 02 66202066
Fax: +39 02 66202099
email : @Contact

Drilled plates
These can be manufactured with different kinds of perforations, of which the main ones are round, square, rectangular, oblong, tapered and bridged. Standard size is 2000x1000 mm, however the machines used enable perforation of plates up to 6000x2000 mm. Thickness of the plates varies from 0,3 mm to 20 mm for plates in carbon steel and up to 15 mm for stainless steel plates. It is possible to obtain plates with perforated areas in special geometric shapes, for example trapezoidal or circular crowns. After perforating, the plates are straightened and may undergo degreasing treatment to eliminate residues of the lubricant used during the punching process. Plates with different levels of surface finishing can also be supplied, attainable through butter-finishing, sandblasting and electrolytic polishing. They can be produced in different materials, such as for example, carbon steel, stainless steels, Nickel-Chromium alloys, pure metals.
Drilled plates
Can be produced with three different kinds of perforations: cylindrical, step drilled and conical. The diameter of the perforations can vary from 1 to 6 mm. The maximum dimensions of the drilled plates are 6000x2000 mm, with a maximum thickness of 15 mm. After drilling, the plates are butter-finished and washed to guarantee perfectly clean perforations. They may undergo further surface finishing treatments, such as for example, sandblasting and electrolytic polishing. Different finishes or special coatings may be carried out following specific request by the client. The drilled plates can be produced in different materials such as: carbon steel, stainless steels, Titanium, Nickel-Chromium alloys, Copper and its alloys.
Milled plates
It is possible to produce plates with different milling profiles, in compliance with the client’s specific requests, by using the appropriate tools. The maximum sizes and thicknesses of milled plates depend on the type of milling required. After milling, the plates are butter-finished and washed to guarantee perfectly clean milled areas. They may undergo further surface finishing treatments, mainly sandblasting or electrolytic polishing. Different finishes or special coatings may be carried out following specific request by the client. The milled plates can be produced in different materials such as: carbon steel, stainless steels, Aluminium Alloys, Copper and its alloys.
Plain Dutch weave
This is a special kind of weaving in which the weft wires, which are normally of a smaller diameter than the warp wires, are woven so that they are fully joined together. There is no opening in the mesh, only a transversal passage where the weft wires alternate. Plain Dutch weave cloths are used almost exclusively for filtering, in particular when the weave must have a high level of stiffness. Plain Dutch weave cloths may be supplied in rolls of various widths and lengths and in flat panels in different geometric shapes. It is possible to make them from all metal materials and alloys, that can be drawn into wire, such as for example carbon steel, stainless steels, Nickel-chromium alloys, pure metals.
Twilled Dutch weave
Wire cloth in which each weft wire passes successively over two and under the next adjacent pair of warp wires. With this weaving, larger diameter wires can be used compared to plain Dutch cloths; this means that extremely compact cloths can be produced, obtaining retention of as little as 5 microns. Twilled Dutch weave cloths are also used almost exclusively for filtering, in particular when the weave must have a high level of stiffness. These weave cloths may be supplied in rolls of various widths and lengths and in flat panels in different geometric shapes. It is possible to make them from all metal materials and alloys, that can be drawn into wire, such as for example, carbon steel, stainless steels, Nickel-Chromium alloys, pure metals.

INFORMATION:

Main Production:Filtering elements and fabricated parts; conveyor belts; components for the oil, petrochemical and chemical industries
Applications:Bottling, packaging, food industry
Company establishment date:1921
Collective investment fund:€ 2,5 milions
Turnover:2013 - € 48 milions
Number of employees:222
Production surface:110,000 m2 ground, 35,000 m2 covered
Certifications:ISO 9001, ISO 14001, OHSAS 18001
Registrations to category associations:Unione Industriali di Lecco
Export percentage:70% approx.
Subsidiaries in the world:Costacurta b.v., Santpoort Holland
CONTACT COSTACURTA S.p.A. - VICO


  • IMAGE   
    CODE
    Enter the text you see
    I have read and accept the Privacy policy

News da itfoodonlineblog
Invento PET: We shape the innovation
7/6/2015 11:22:27 AM
INVENTO has been created in 2004 with one goal – developing a new and innovative technology for the global production of PET containers in a form of CAN. The worldwide patented PET can technology developed by INVENTO, is a breakthrough combination of the best characteristics of PET bottles and aluminium cans. Ptented in 96 countries…
Ing. Enea Mattei SpA has acquired British company Winton Engineering, the vehicle mounted power solutions provider.
7/1/2015 8:47:36 AM
This bolsters Ing. Enea Mattei’s presence in the vehicle sector, consolidating its global leadership Through its UK subsidiary Mattei Compressors Ltd, Ing. Enea Mattei recently acquired Winton Engineering, with headquarters in Great Britain, established in 1985 and specialised in using the power of vehicle engines to drive auxiliary equipment, delivering compressed air and electrical power,…
IGUS: New energy supply system for rotary motion up to 7,000 degrees – lightweight and highly flexible
6/19/2015 9:46:38 AM
The twisterband HD is one of more than 100 innovations presented by igus at the 2015 Hannover Messe Rotary motions in machinery can be tricky when managing cables and hoses. In order to protect and guide them safely, igus has expanded its range of energy chains for rotary motion with a “heavy duty” version of…
Bread coking systems
6/18/2015 2:05:31 PM
If you are interested in having more information on cooking plants food industry, contact us and we will get back in the day. One of the most beneficial aspects of the technology developed by Tecnopool is the extreme flexibility that the systems of baking baked goods can reach. The design office is always available to…
Science-Directory.net / Technology - Technology Web Directory