[twitter-follow screen_name=’itfoodonline’]
Tweet
Tweet #INTERPACK 2014
For info please contact +39 0362 244182, or mail to info@itfoodonline.com.
Cibra has been making bag sealers since 1953. Its first sealing pincer for polyethylene film is now in Milan’s Museum of Science and Technology.
The basic range of multi-purpose sealers for plastic and multi-layer bags is complemented by the production of custom-made machines for special sealing problems, and sealing bars to be placed on special packaging lines.
CIBRA’S sealers are mostly used at the end of the packaging line for food products, chemicals and pharmaceutical products, plastic and metallic parts and the like.
All models by Cibra are meant to be used in high quality packaging, where bags must be sealed easily but without ever risking a wrong seal.
For perfect seals: models PN PRG and IND 100 PRG
These sealers share three important features that are necessary in food, chemical and pharmaceutical industries and allow them to be used in protected environments or sterile areas:
1. -they guarantee a perfect seal that can be constantly repeated. This guarantee comes from the possibility of regulating very precisely all the sealing parameters, and from the width of the sealing strip;
2. -they are user- friendly and can be used very easily by operators whose attention must be dedicated to other phases of the process;
3. -their structures are made only of stainless steel, chromate steel, aluminium or plastic, that assure the highest level of hygiene.
The impulse seal is performed by resistances 3, 4, 6 or 12 mm wide. A sophisticated control by microprocessor allows a precise setting of all the sealing parameters: sealing time, sealing temperature, cooling time or temperature. Recipes for various materials can be stored; sealing data can be logged; errors or problems are auto diagnosed.
This guarantees that all seals are perfectly repeated.
The two models have a very different structure suited for different problems.
Model PN PRG is available in cm 60 or cm 80 width. It works on compressed air with an automatic cycle activated by a safety pedal. Cibra can supply only the sealing head for desk-top use or placement on existing supports, or a vertical structure with supporting table as shown in the photo..
The IND PRG sealer is specially designed for sealing heavy and/or bulky bags and for bags contained in bins or boxes .
The trolley feeder allows the sealing unit to be conveyed directly over the bag to be sealed. The vertical support allows the sealing pincers to be raised, lowered and turned into the most convenient position. Pincers can also be removed from the support and rested on the trolley to reduce the dimensions of the unit when not in use. For special needs the pincers can be fixed anywhere and used at any distance from the trolley.
For all uses:
Sealer model AKA seals the smaller bags, up to 30 cm wide, made of multi-layer films, co-extruded films, BOPP, heat-sealable cellophane, paper+plastic.
These bags are used for food, coffee seeds, chemicals, powders, and any product requiring a strong and long lasting protection. The 12 mm wide embossed seal is usually made immediately in the time of lowering and raising the pedal. Sealing temperature is controlled by a thermo regulator.
AKA can also be fitted with a timer and with a compressed air movement that make the sealing cycle fully automatic and totally repeatable.
AKA is quite suitable for small, high quality productions, but also in big industries as a support to automatic machines for re-sealing bags that are not perfect, or for sample productions.
