COSTACURTA S.p.A. - VICO

COSTACURTA S.p.A. - VICO - BELT

Via Grazioli, 30 - 20161 Milano (MILANO) (ITALY)
: +39 02 66202066
: +39 02 66202099
: @Contact


The VICO-MB is a ‘balanced’ belt and consists of alternating right and left-hand wire spirals, connected together by pre-crimped connecting rods. This is classified according to the pitch and internal spacing of the spiral wire, the diameter of the wire and rod and the type of selvage. VICO-MB can have welded or ladder selvages or ladder welded selvages. It can also be supplied with driving chains and guard edges and reinforced selvages. VICO-MB belts are mainly made of carbon steel, galvanized steel and stainless steels.
The VICO-RC belt is made of high tensile strength stainless steel or carbon steel wires and is driven by sprockets. The high flexibility of this belt allows the use of very small shaft. VICO-RC belts are classified according to the weave width and weave spacing, the diameter of the wire, the internal and external hook widths and the type of selvage. They can have simple loop or double loop end selvages. VICO-RC belts are mainly made of spring steel and stainless steels.
The VICO-TR belt is made of flat bars and is sprocket driven. It is characterized by a large free area, ease of cleaning and flexibility in use from –150°C to 550°C. It also guarantees considerable reliability when working because it remains perfectly centred thanks to its sprocket wheel drive. VICO-TR belts are classified according to the pitch of the flat bar bends and of the rods, the diameter of the rods and the size of the flat bars. VICO-TR belts can be supplied with button head welded connecting rods or rods with clinched edges. VICO-TR belts are mainly made of carbon steel, galvanized steel and stainless steels. For the driving of the VICO-TR belts standard cast iron or carbon steel sprockets are normally used, and are normally available in stock. On request, the sprockets can be made of AISI 304, AISI 316, Nylon, UHMW 1000, etc. The sprockets are supplied with an unmachined axial bore and with the hub sized according to the diameter of the shaft used.
The VICO-TU belt consists of closely wound alternating right and left-hand wire spirals connected together by straight connecting rods. This is classified according to the pitch and internal spacing of the spiral wire, the diameter of the wire and rod and the type of selvage. VICO-TU can have welded or ladder selvages. It can also be supplied with driving chains and guard edges and rods with special surface finishes. VICO-TU belts are mainly made of carbon steel, galvanized steel and stainless steels.
The VICO-TUG belt consists of wire links connected by means of connecting rods. It is usually sprocket or wheel driven. Special chains can also be mounted to suit particular applications or specifications. VICO-TUG can be made by tightening the links, or by placing spacers between the links, such as washers, sleeves or small springs. It is classified according to the pitch of the links and the rods, their diameter and the type of selvage. Welded selvages are normally used for VICO-TUG belts. They can also be supplied with driving chains and guard edges. VICO-TUG belts are mainly made of carbon steel, galvanized steel and stainless steels.
VICO-Strand and VICO-WR
These are so-called strand conveyor belts. They are both woven belt type. In VICO-WR the warp is made of groups of two or three or four strand wires (each group is at a long distance from the next), while the weft wires are of a diameter larger than the single strand. In the VICO-Strand the warp is made of single strands and the weft wires are shaped to accommodate the strand and welded at the ends. This type of conveyor belt is perfectly flat, with high transversal stability. VICO-Strand and VICO-WR belts are mainly made of carbon steel, galvanized steel and stainless steels.
VICO-Slat (perforated)
The VICO-Slat belt is made of shaped perforated plates hinged together using connecting rods. VICO-Slat belts can be made with different shapes, are normally chain driven and can be supplied with guard edges. VICO-Slat (perforated) belts are mainly made of carbon steel, galvanized steel and stainless steels.

 

DOWNLOAD AREA

Science-Directory.net / Technology - Technology Web Directory