SANTOEMMA, IDRO FOAM RINSE FOOD – PROFESSIONAL CLEANING MACHINES

Facebook
LinkedIn
Twitter

Santoemma is an Italian Company, distributed in more than 70 countries, that since 1980 has been producing professional cleaning machines and systems. Santoemma products provide optimal and innovative solutions in diverse application fields.

IdroFoamRinse FOOD is an innovative machine, electrically powered, allowing to spray foam and rinse continuously, for a complete cleaning and sanitizing in food processing areas, such as: supermarkets, food factories, industrial kitchens.
The cleaning process is carried out through three stages:
1. Spraying of dense foam on all the surfaces
2. Foam chemical action
3. Rinsing with clean water, at a controlled pressure
The water used for foaming and rinsing is directly taken from the water network, therefore the machine has an unlimited autonomy.
The internal air-compressor allows to produce foam with an optimal density. It is not necessary to connect the machine to an external compressed air system.
IdroFoamRinse FOOD is supplied standard with 10 meters hose, hose-roller and stainless-steel Foam/Rinse gun.
Areas where IdroFoamRinse FOOD can be used:
IdroFoamRinse FOOD is indicated for a complete cleaning and sanitizing of all the surfaces, including walls, refrigerator cells, work-tables, machinery and transport trolleys in food processing areas, such as: Supermarkets, in food preparation areas (fish and meat processing) and storage areas (refrigerator cells). Medium-sized factories producing and packaging food (meat, salami, fish, milk/cheese, vegetables), butcheries, dairies. Big food factories, to clean machinery, equipments, transport trolleys Caterings and industrial kitchens, to clean rooms and food preparation areas
Advantages of IdroFoamRinse FOOD:
1. Better cleaning and sanitising result: dense foam does not immediately fall onto the floor, but stays on the surfaces where it has been sprayed for some minutes. The foam prolonged action assures to make the most of the cleaning effect of the product, ensuring both cleaning and sanitising effect.
2. Visual effect of foam: foam covers in white all the surfaces where it is sprayed such as walls, sinks, fixtures. The operator can therefore check that every corner has been covered, thus allowing a complete action in every point.
3. Complete sanitizing action: Laboratory tests certify that using the machine in combination with specific chemicals, it is possible to kill 99,9% of bacteria.
4. Rinsing at a controlled pressure avoids that any particle is jumping on other surfaces and prevents the creation of a haze of water vapours, which would keep in suspension the micro-organisms for several minutes. These micro-organisms would fall again on the surfaces after rinsing, affecting the efficacy of the bactericide action.
5. Saving of time: while foam acts on the surfaces where it has already been sprayed, the operator is free to operate on other surfaces. Therefore, even a big room can be completely foamed in a short time and there is no idle time.
6. Detergent saving: the chemical is used without waste because it does not immediately fall onto the floor.
7. Reduced power consumption: the machine requires little electrical power and therefore it can be used in any place.
Other advantages of IdroFoamRinse FOOD:
The machine has a contained size and it is easy to carry from place to place. The machine can work with unlimited autonomy in foaming and rinsing, thanks to a continuous filling system which takes water directly from the water network. Foam is generated by an internal compressor, therefore it is not necessary to connect the machine to an external compressed air system. The control/regulation panel is handy and the controls are simple and intuitive. Pure chemical is contained in its separate tank, having a volume up to 25 liters, and it is automatically used by the machine in a controlled quantity.

Info: Tel. +39.02.3391 2487 Fax +39.02.3391 2538 1011 www.santoemma.com – E-mail: santoemma@santoemma.com

Lascia un commento

Stay Connected

More Updates